About

Dr. Rupayan Roy

Assistant Professor, Fashion Technology (BFTech)

Kannur Campus

About

Dr. Rupayan Roy

faculty-1

rupayan.roy@nift.ac.in
Link - Campus Coordinator, Coordinator International & Domestic Linkages (CI&DL)

LinkedIn Profile

About

Dr. Rupayan Roy is an Assistant Professor in the Department of Fashion Technology at the National Institute of Fashion Technology (NIFT), Kannur, Kerala, where he teaches undergraduate and postgraduate courses in Fabric Science, Technical Textiles, Yarn Manufacturing, Research Methodology, and Industrial Engineering. He holds a Ph.D. in Textile Engineering from IIT Delhi, where he also earned his M.Tech, and completed his B.Tech in Jute and Fibre Technology from the University of Calcutta. His expertise spans polymer composites, needle-punched nonwoven engineering, fibrous filter media design, protective textiles, and smart functional materials.

Dr. Roy's research focuses on fibre-reinforced composites, soft body armour, and filtration systems engineered through nonwoven structural design. He has authored 20 peer-reviewed journal articles, including several in high-impact venues such as Polymer Composites and Composites Part B, alongside 28 book chapters published by Elsevier, Wiley, Springer, and IGI Global, and seven international conference papers. He was offered a postdoctoral position at the Institute of Nano Materials, Technical University of Liberec, Czech Republic, and received international travel awards from DST and IIT Delhi to present at conferences in Belgium, Thailand, and the UK.

Beyond research, Dr. Roy mentors student dissertations and has independently developed two new courses, Technical Textiles and Automation in Apparel Industry. He is a member of the Institute of Engineers (India) and the Textile Association of India, and remains an active alumnus of IIT Delhi and the University of Calcutta.

Peer-Reviewed Journal Publications:

Roy, R., Laha, A., Awasti, N., Majumdar, A., & Butola, B. (2018). Multi layered natural rubber coated woven paramid and UHMWPE fabric composites for soft body armor application. Polymer Composites, 39(10), 3638. https://doi.org/10.1002/pc.24391

Roy, R., & Ishtiaque, S. M. (2019). Influence of punching parameters on fibre orientation and related physical, mechanical and functional properties of needle-punched nonwoven. Fiber & Polymers, 20(1), 191. https://doi.org/10.1007/s12221-019-8784-4

Roy, R., & Ishtiaque, S. M. (2019). Application of newly developed fibre orientation measurement techniques for needle-punched nonwoven. Indian Journal of Fibre & Textile Research, 44(2), 131.

Roy, R., & Ishtiaque, S. M. (2019). Effect of fibre orientation on mechanical and functional properties of needle-punched nonwoven. Indian Journal of Fibre & Textile Research, 44(3).

Roy, R., & Chatterjee, S. (2019). Development of a multi-component air filter by incorporating the density gradient structure in needle punched nonwoven. Fiber & Polymers, 19(12), 2597. https://doi.org/10.1007/s12221-018-8497-0

Roy, R., Majumdar, A., & Butola, B. (2019). Comparative study of P-aramid based soft and stiff composite panels for protective application. Fiber & Polymers, 20(2), 406. https://doi.org/10.1007/s12221-019-8733-2

Roy, R. (2019). Functional properties of needle-punched nonwovens of jute polyester blended fabric. Asian Journal of Textile, 19(12), 2597.

Dixit, P., Ishtiaque, S. M., & Roy, R. (2019). Influence of sequential punching in layered structure of needle punched nonwoven on the filtration behavior. Composites Part B: Engineering. https://doi.org/10.1016/j.compositesb.2019.107654

Roy, R., Ishtiaque, S. M., & Chatterjee, M. (2020). Low velocity impact performance and puncture resistance of nonwoven geotextiles with the change of process parameters. Fiber & Polymers, 21(1), 188–195. https://doi.org/10.1007/s12221-020-8974-0

Roy, R., & Ishtiaque, S. M. (2020). Optimal design of a filter media by tuning the structure of needle punch nonwoven: Influence of carding parameters. Fiber & Polymers, 21(9), 2125–2137. https://doi.org/10.1007/s12221-020-9680-7

Roy, R., Ishtiaque, S. M., & Dixit, P. (2020). Impact of fibre orientation on thickness and tensile strength of needle-punched nonwoven: Optimization of carding parameters. Journal of Industrial Textiles. https://doi.org/10.1177/1528083720910706

Roy, R., Ishtiaque, S. M., & Dixit, P. (2020). Optimal design of a composite fibrous filter media through vertical integration of fibres in needle punched nonwoven. Composites Communications. https://doi.org/10.1016/j.coco.2020.100484

Roy, R., & Ishtiaque, S. M. (2021). Design and development of fibrous filter media induced by structural characteristics of needle punched nonwoven. Journal of Industrial Textiles. https://doi.org/10.1177/1528083721990440

Mamuye, W., Ishtiaque, S. M., Roy, R., & Dixit, P. (2021). Impact of cross-lapping angle and needling parameters on mechanical and functional properties of nonwoven air filter fabric. Journal of Industrial Textiles. https://doi.org/10.1177/15280837211048158

Roy, R., Laha, A., Roy, S., Sood, P., & Sony, S. (2022). Filtration performance of needle-punched nonwoven air filter media through dyeing process. Indian Journal of Fibre & Textile Research, 47(4), 417–423. https://doi.org/10.56042/ijftr.v47i4.58323
Roy, R., Ishtiaque, S. M., Dixit, P., & Laha, A. (2022). The combined effect of carding and punching parameters on the structural, mechanical and functional properties of needle-punched nonwovens. Journal of Industrial Textiles, 52.
Tyagi, G. K., Jotheswaran, S. G., & Roy, R. (2022). Functional properties of polyester nonwoven fabrics. Asian Textile Journal, 31(12), 21–25.
Roy, R., & Ishtiaque, S. M. (2023). Customization of hierarchical air filter media by tailoring the structural parameters of needle punched nonwoven. Journal of Industrial Textiles. https://doi.org/10.1177/15280837211029050
Roy, R., Ishtiaque, S. M., Laha, A., Sood, P., & Sony, S. (2023). Quantification of binder fibres in needle-punched nonwoven and its influence on physical-mechanical-functional properties of an air filter media. Indian Journal of Fibre & Textile Research, 48(2), 1–12.
Roy, R., Laha, A., Dash, A., Chakraborty, A., & Sasi, A. E. V. (2023). Investigating the influence of fiber linear density and blend ratios on polyester nonwoven fabrics characteristics. Indian Textile Journal, 133(8), 64–72.

International Conference Papers:

Roy, R., & Ishtiaque, S. M. (2017). Air permeability of same GSM nonwoven fabrics for different punching parameters. In 1st International Conference on Textile and Clothing – Present and Future Trends, University of Calcutta, India.

Roy, R., & Ishtiaque, S. M. (2018). Study about the effect of punching on the orientation of fibres and properties of needle-punched nonwoven. In 6th International Conference on Technical Textile and Nonwoven, IIT Delhi, India.

Roy, R., & Ishtiaque, S. M. (2018). Influence of carding and punching parameters on fibre orientation in carded web and properties of needle punch nonwoven. In 91st Textile Institute World Conference (TIWC-2018), University of Leeds, United Kingdom.

Ishtiaque, S. M., & Roy, R. (2018). Structural analysis of cross laid needle punched nonwoven considering carding and punching parameters as variables. In STRUTEX, Technical University of Liberec, Czech Republic.

Roy, R., & Ishtiaque, S. M. (2019). Evaluation of fibre orientation in fibrous assembly by tracer fibre technique considering the impact of the orientation on filtration performance. In 19th World Textile Conference (Autex-2019), Ghent University, Belgium.

Roy, R., & Ishtiaque, S. M. (2019). Evaluation of fibre orientation in fibrous assembly by tracer fibre technique and its influence on physical-mechanical properties. In 6th Global Conference on Polymer and Composite Materials (PCM-2019), Rangsit University, Thailand.

Roy, R. (2024). Performance of needle punched nonwoven based composites. In 6th International Conference on Academic Research in Science, Technology, and Engineering, Vienna, Austria.

Book Chapters (27):

Basak, S., Laha, A., Bar, M., & Roy, R. (2018). Recent advances in protective textile materials. In Advanced textile engineering materials (pp. 55–86). Wiley. https://doi.org/10.1002/9781119488101

Roy, R. (2023). Eco-friendly colors: A review of recent advances in natural dyes. In Promoting sustainable management through technological innovation (pp. 203–215). IGI Global. https://doi.org/10.4018/978-1-6684-9979-5.ch013

Roy, R. (2023). Raw materials for sports garments, seam technique, and applicable finishes: A review. In Intelligent engineering applications and applied sciences for sustainability (pp. 270–290). IGI Global. https://doi.org/10.4018/979-8-3693-0044-2.ch015

Roy, R., & Ramakrishnan, S. (2024). Embracing the future of retail with virtual try-on technology. In Data-driven intelligent business sustainability (pp. 344–359). IGI Global. https://doi.org/10.4018/979-8-3693-0049-7.ch023

Roy, R., & Ashmika, R. (2024). Textile products in healthcare: Innovations, applications, and emerging trends. In Emerging technologies for health literacy and medical practice (pp. 288–314). IGI Global. https://doi.org/10.4018/979-8-3693-1214-8.ch014

Roy, R., Ashmika, R., & Chakraborty, A. (2024). Polymeric energy harvesting materials: A comprehensive overview. In Emerging materials, technologies, and solutions for energy harvesting (pp. 33–71). IGI Global. https://doi.org/10.4018/979-8-3693-2003-7.ch003

Roy, R., Laha, A., & Chakraborty, A. (2024). Artificial intelligence in protective gear design and maintenance. In Biomedical research developments for improved healthcare (pp. 55–77). IGI Global. https://doi.org/10.4018/979-8-3693-1922-2.ch004

Roy, R., & Tiwari, M. (2024). IoT application in garment manufacturing: Enhancing efficiency, quality, and sustainability. In Fostering innovation in venture capital and startup ecosystems (pp. 147–170). IGI Global. https://doi.org/10.4018/979-8-3693-1326-8.ch008

Roy, R., Ashmika, R., Chakraborty, A., & Sharafat, I. (2024). Future trends in AI and academic research writing. In Utilizing AI tools in academic research writing (pp. 232–254). IGI Global. https://doi.org/10.4018/979-8-3693-1798-3.ch015

Roy, R., Ashmika, R., Sinha, K., & Priya, R. (2024). Threads of tradition: A comprehensive review of Indian textile heritage. In Promoting multi-sector sustainability with policy and innovation (pp. 1–37). IGI Global. https://doi.org/10.4018/979-8-3693-2113-3.ch001

Roy, R., Shukla, S., & Laha, A. (2024). A comprehensive review on Indian textile heritage for sustainability. In Eco-innovation and sustainable development in Industry 5.0 (pp. 223–246). IGI Global. https://doi.org/10.4018/979-8-3693-2219-2.ch011

Roy, R. (2024). A comprehensive review on nonwoven materials for the healthcare sector. In Social innovations in education, environment, and healthcare (pp. 339–358). IGI Global. https://doi.org/10.4018/979-8-3693-2569-8.ch017

Roy, R., Chaudhari, P. A., & Priya, R. (2024). Plant-able cups, sip sustainably, seed responsibly. In Futuristic technology for sustainable manufacturing (pp. 126–152). IGI Global. https://doi.org/10.4018/979-8-3693-1862-1.ch008

Roy, R., Ajith, A., & Vaishnavi, K. L. V. (2024). A systematic review on ERP and supply chain management. In Applications of new technology in operations and supply chain management (pp. 38–57). IGI Global. https://doi.org/10.4018/979-8-3693-1578-1.ch003

Roy, R., Kaur, A., & Dalvi, L. (2024). Recent advances in anti-fungal finishing for natural textiles. In Eco-friendly skin solutions for natural cosmeceuticals (Ch. 13). IGI Global. https://doi.org/10.4018/979-8-3693-5473-5.ch013

Tiwari, M., & Roy, R. (2024). Industry 4.0 in garment manufacturing: Challenges and opportunities. In Sustainable development goals: Technologies and opportunities (p. 149). CRC Press. https://doi.org/10.1201/9781003468257-9

Roy, R., Chavan, P. P., Rajeev, Y., Praveenraj, T., & Kolazhi, P. (2024). Sustainable manufacturing practices in textiles and fashion. In Sustainable manufacturing practices in the textiles and fashion sector (pp. 1–22). Springer. https://doi.org/10.1007/978-3-031-51362-6_1

Chavan, P. P., Roy, R., Sekhar, V. P., & Pandit, P. (2024). Sustainability in production and opportunities of electroconductive textiles. In Advances in electrically conductive textiles: Materials, characterization, and applications. Elsevier. https://doi.org/10.1016/B978-0-443-22047-0.00023-4

Roy, R., Padamata, V., & Bhamburkar, V. (2025). The influence of rankings on the mental health of instructional staff and students. In Influence of university rankings on institutions: Ethics, controversies, and competition (Ch. 9). IGI Global. https://doi.org/10.4018/979-8-3373-7518-2.ch009

Roy, R., & Chavan, P. P. (2025). Nano-engineered protective textiles using recycled wastes. In Nanotechnology-assisted recycling of textile waste (Ch. 13). Wiley. https://doi.org/10.1002/9781394175017.ch13

Roy, R., Tiwari, M., & Dalvi, L. A. (2025). A review on 3D body scanning for garment manufacturing: Past and future. In Multi-industry digitalization and technological governance in the AI era (Ch. 16). IGI Global. https://doi.org/10.4018/979-8-3373-1681-9.ch016

Roy, R., Padhi, A., Nambiar, A. R., & Bhosale, V. S. (2025). Herbal excipients and polymers: An overview. In Applications of herbal excipients and polymers in wound healing (Ch. 4). IGI Global. https://doi.org/10.4018/979-8-3373-3977-1.ch004

Roy, R., Nambiar, A. R., Padhi, A., & Priya R, M. (2025). Overcoming modern farming challenges with automation technologies. In Exploring generative AI for collaborative robots in agriculture 6.0 (Ch. 5). IGI Global. https://doi.org/10.4018/979-8-3373-4207-8.ch005

Chavan, P. P., Roy, R., & Jadhav, A. J. (2025). Potential role of marine biopolymers in paints and anticorrosive coatings. In Marine biopolymers (pp. 769–804). Elsevier. https://doi.org/10.1016/B978-0-443-15606-9.00025-5

Chavan, P. P., Roy, R., Pandit, P., Chandrakar, K., & Maity, S. (2025). Marine biopolymers in textile applications. In Marine biopolymers (pp. 805–832). Elsevier. https://doi.org/10.1016/B978-0-443-15606-9.00026-7

Roy, R., Padhi, A., Nambiar, A. R., & Bhamburkar, V. (2025). Sports and fitness applications of wearable technology. In Next-generation electronic textiles and conductive materials for smart wearables (Ch. 16). IGI Global. https://doi.org/10.4018/979-8-3373-4287-0.ch016

Roy, R., Rao, M., Pramod, M., & N, C. (2026). Administrative strategies and their influence on academic excellence in higher education. In Driving institutional excellence through accreditation standards in higher education (Ch. 2). IGI Global. https://doi.org/10.4018/979-8-3373-2965-9.ch002

Roy, R., & Padamata, V. (2026). The influence of administrative procedures on academic performance. In Driving institutional excellence through accreditation standards in higher education (Ch. 11). IGI Global. https://doi.org/10.4018/979-8-3373-2965-9.ch011

2020, MHRD Fellowship for Doctoral Research, Government of India, New Delhi (July 2015 – September 2020)

2019, International Travel Support, Department of Science and Technology (DST), Govt. of India — for 19th World Textile Conference (Autex-2019), Ghent University, Belgium

2019, Research Excellence Travel Award, IIT Delhi — for 6th International Conference on Polymer and Composite Materials (PCM-2019), Rangsit University, Thailand

2018, Research Scholar Travel Allowance, IIT Delhi — for 91st Textile Institute World Conference (TIWC-2018), University of Leeds, United Kingdom

2015, MHRD Fellowship for Master's Research, Government of India, New Delhi (July 2013 – June 2015)

2013, GATE 2013 – All India Rank 65 (Textile Engineering), Ministry of Education, Govt. of India

2021, Post-Doctoral Position (offer), Institute of Nano Materials, Technical University of Liberec, Czech Republic (Dec 2021 – Dec 2022)